Watergekoelde koelmachines

In combinatie met bijvoorbeeld een WKO of droge koeling levert IBK compacte watergekoelde koelmachines. Geschikt voor binnenopstelling variërend in koelvermogens van 55 kW tot 3912 kW. De machines worden geleverd met scrollcompressoren, schroefcompressoren of centrifugaalcompressoren en kunnen worden uitgevoerd met platenwisselaars of shell- and tube wisselaars.

Meer informatie

Om goed antwoord te kunnen geven op jullie wensen, is het fijn als jullie bijgaand formulier invullen. We nemen dan uiterlijk binnen 2 dagen contact op.

Water-water koelmachine aanvragen

* 267-2349 kW
* 76.0-668 Ton

CWW/Y 1302-B÷9002-B


The liquid Chillers of the CWW/Y 1302-B÷9003-B series, with R134a refrigerant, are designed to satisfy the needs of the service sector or industrial systems requiring high power.

Equipped with latest generation Screw compressors, shell and tube exchangers and connections for condensation with cooling tower water or well water or with a Dry-Cooler, these units can also be produced in super silent versions. Furthermore, they have a series of accessories which are factory fitted or supplied separately such as heat recovery in series or in parallel, soft start and, if necessary, a device for operating a Heat Pump. Designed and produced to optimize the layout of each component so as to make any necessary maintenance operations more convenient, these units have an essential and compact structure intended for indoor installation.

The models 1302-B÷1702-B are compliant to ErP 2021 Regulations. The models 1902-B÷9002-B are compliant to ErP 2021 Regulations with ID accessory (Inverter on all compressors).

On request, units can be supplied with R513A refrigerant.


  • CWW/Y - Cooling only
  • CWW/Y/SSL - Super silenced cooling only


  • 267-2349 kW
  • 76.0-668 Ton


  • Structure with supporting frame, made of galvanised sheet metal with additional protection provided by polyester powder coating.
  • Screw compressors with built-in oil separator, suction filter, crankcase heater, oil sight glass, thermal protection and stepless capacity steps.
  • Shell and tube type condenser, with easily removable cast iron heads to enable access for maintenance operations. Each cooling circuit is supplied with an independent condenser. Water connections for cooling tower and Dry-Cooler operation; on request for well water.
  • Shell and tube evaporator with two independent circuits on the refrigerant side and one on the water side, complete with water differential pressure switch.
  • Cooling circuit shut-off valves on discharge and liquid line.
  • Electronic expansion valve.
  • Electronic high and low pressure gauges.
  • R134a refrigerant. On request R513A refrigerant.
  • Electrical board includes: main switch with door safety interlock, fuses, thermal protection relays for compressors.
  • Microprocessor control and regulation system.